Seal,Pusher, 3/4",High
Tensile Double Notch,2
1/4"L,700/Cs. A strapping
pusher seal is used to hold
together the two ends of
steel strapping. The seal is
threaded on to the strapping
and then crimped for a strong
seal. It is important to
match the width of the seal
to the size of the metal
strapping you are using.
NOTCH JOINT :
One-way to lock strap ends is
to cut, or “notch” the seal
and the strapping it joins to
form tabs at the edges. These
tabs are bent down (down
notch joint) or bent up
(reverse notch joint). The
strength of the notch joint
comes from the mechanical
interlock between the seal
and strapping. Notch joints
are typically used on waxed
strapping in packaging and
unitizing applications.
